Installing Drivers - 3D Printing Systems Up Plus User Manual

3d printer

Hide thumbs Also See for Up Plus:

Table of Contents

3.1.3 Installing drivers

Required for Windows only, MAC doesn't require drivers.

Connect the printer to a computer with the USB cable. The computer should pop up the "Found New

Connect the printer to a computer with the USB cable. The computer should pop up the "Found

Hardware Wizard" window. Choose "No, not this time", and then "next". Then choose "Install from

Hardware Wizard" window. Choose "No, not this time", and then "next"

a list or specific location (Advanced)", then "Next".

Here is a video on the driver installation for Windows

Here is a video on the driver installation

Windows 8

To install the Windows 8 drivers for your UP Plus, or UP Mini 3D printer you will need to do the

following;

Open the Windows 8 control panel

Select General

Advanced Startup

Restart now

On reboot pop up menu will appear

Select "Troubleshoot"

On the next menu select Advanced Options

Startup settings

Restart

Disable Driver signature Enforcement

Done

Now you should be able to install the drivers without any issue.

Click "Browse", and choose C:\Program Files\UP\Driver, then "Next".

Click "Browse", and choose C:

UP Plus 3D Printer User Manual

3D Printer User Manual

http://www.youtube.com/watch?v=hGYTCRYkJr4

drivers for your UP Plus, or UP Mini 3D printer you will need to do the

Then choose "Install from

v 2013.1.31

.1.31

Table of Contents