Initialising The Printer Ing The Printer - 3D Printing Systems Up Plus User Manual

3d printer

Hide thumbs Also See for Up Plus:

Table of Contents

3.1.5 Initialising the Printer

ing the Printer

Before anything can be printed, the printer must be

Before anything can be printed, the printer must be initialised. Click the "Initialis

the "3D print" menu. The printer will beep and the initialisation procedure will begin. The p

the "3D print" menu. The printer will beep and the

will then return the platform and print head to the printer's origin and beep again when it is ready.

(Windows version)

TIP: If your printer is not responding properly, the first thing to try is to re

If your printer is not responding properly, the first thing to try is to re-initialis

clicking the 'Initialise' option from the '3D Print' menu. If still not working switch off and on the

e' option from the '3D Print' menu. If still not working switch off and on the

printer at the back. Check the

printer at the back. Check the printer driver's trouble shooting section. The printer can also be

tialised by pressing the front switch on the p

ed by pressing the front switch on the printer.

UP Plus 3D Printer User Manual

3D Printer User Manual

(Mac version)

Initialise" option under

ation procedure will begin. The printer

initialise the printer by

The printer can also be ini-

v 2013.1.31

.1.31

Table of Contents