Options During Printing - 3D Printing Systems Up Plus User Manual

and free of drafts.)
Please ensure the following points are taken care of before printing: Please ensure the following points are taken care of
Connect the 3D printer, initialis initialise it, and set up the printing system. Load the model and place it
properly on the virtual platform of the rtual platform of the software window. Check if there is enough
model (the software will, generally, tell you if there is not enough material when you begin the print) model (the software will, generally, tell you if there is not enough material when you begin the print) model (the software will, generally, tell you if there is not enough material when you begin the print).
If not, change the reel to a new one.
For large models results can be improved by preheating the build platform. Click the "Preheat" For large models results can be
option on the "3D Print" menu and the printer begins to heat the platform. Let the platform get up option on the "3D Print" menu and the printer begins to heat the platform.
to 105°C before beginning to print. C before beginning to print.
Click menu "3D Print->Print" Print", and the print dialog box pops up. Choose "Preferences
printing parameters. Click "OK
(Windows version) (Windows version)

Options During Printing:

Options During Printing:
• Stop All: By pressing "Stop All" or the "Stop Print" icon will terminate the current print By pressing "Stop All" or the "Stop Print" icon will terminate the current print By pressing "Stop All" or the "Stop Print" icon will terminate the current print.
You can reprint the last job by clicking "Tools" and "Print Again". By stopping the print, You can reprint the last job by clicking "Tools" and "Print Again"
the software looses track of material used. the software looses track of material used.
Pause Print: Clicking "Pause Print" will pause the print job, and bring the platform down. Clicking "Pause Print" will pause the print job, and bring the platform down. Clicking "Pause Print" will pause the print job, and bring the platform down.
•
UP Plus 3D Printer User Manual 3D Printer User Manual
new one.
improved by preheating the build platform. Click the "Preheat"
OK" to begin to print.
Load the model and place it
re is enough material for the
Let the platform get up
Preferences" to set the
(Mac version)
. By stopping the print,
v 2013.1.31 .1.31