Table of Contents
Advertisement
Fixing STL Files: If you load a model and pa
If you load a model and parts of it are highlighted in red, then the model has
some errors. The Up software has an option that attempts to fix models with bad surfaces. Under
The Up software has an option that attempts to fix models with bad surfaces. Under
The Up software has an option that attempts to fix models with bad surfaces. Under
the "Edit" menu you will see a "Fix" option. Select the model with inverted surfaces, and click the
the "Edit" menu you will see a "Fix" option. Select the model with inverted surfaces, and click the
the "Edit" menu you will see a "Fix" option. Select the model with inverted surfaces, and click the
"Fix" option to try and fix it.
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
errors use the option in the print screen called "Un
errors use the option in the print screen called "UnSolid Model" and just print it.
Merging models: Several separate models can be merged into a single file by using the "Merge"
Merging models: Several separate models can be merged into a single file by using the "Merge"
Merging models: Several separate models can be merged into a single file by using the "Merge"
option from the "Edit" menu. Simply open all the models you want to merge and arrange them the
option from the "Edit" menu. Simply open all the models you want to merge and arrange them the
option from the "Edit" menu. Simply open all the models you want to merge and arrange them the
way you want on the platform and
way you want on the platform and click on the "Merge" option. When you then save the file, all the
components will be saved as a single STL file.
components will be saved as a single STL file
3.2.3 View Options
Options
To observe the target model in different ways
Rotate: Press the middle mouse button and
Press the middle mouse button and move the mouse: The view can be
served from different angles.
Pan: Press Ctrl and the middle mouse button at the same time and move
middle mouse button at the same time and move the mouse
the view to pan. You can also use the arrow keys to pan the view.
You can also use the arrow keys to pan the view.
UP Plus 3D Printer User Manual
3D Printer User Manual
rts of it are highlighted in red, then the model has
Also saving the model as a UP3 file, then reopening the file can also
Also saving the model as a UP3 file, then reopening the file can also
in different ways, use the mouse to control the view.
option. When you then save the file, all the
can be rotated and ob-
mouse: This causes
v 2013.1.31
.1.31
Advertisement
Table of Contents
