hole at the top of the extruder head and
f the extruder head and push the filament in with some gentle pressure until the
extruder motor grabs it and starts pulling it through the extrusion head. The extruder will then au-
extruder motor grabs it and starts pulling it through the extrusion head. The extruder will then a
extruder motor grabs it and starts pulling it through the extrusion head. The extruder will then a
tomatically extrude a thin filament of material. After the printer beeps a second time (meaning the
tomatically extrude a thin filament of material.
extrusion process is complete), pull away the piece of extruded plastic.
extrusion process is complete), pull away the piece of extruded plastic.
(Windows version)
UP Plus 3D Printer User Manual
3D Printer User Manual
with some gentle pressure until the
econd time (meaning the
(Mac version)
(Mac version)
v 2013.1.31
.1.31