Solution For "Winusb . Dll Not Found " Problem - 3D Printing Systems Up Plus User Manual

8.6 Solution for "Winusb
If you encounter a "Winusb.dll
Option 1: Uninstall Older Driver Uninstall Older Driver and Automatically Install New Driver
1. Open the Windows control panel, go to the "System Properties" dialog box ontrol panel, go to the "System Properties" dialog box and then
"Hardware" page.
2. Click "Device Manager" button, and the following dialog box will popup. Find the ice Manager" button, and the following dialog box will popup. Find the ice Manager" button, and the following dialog box will popup. Find the
"3DPrinter@FreeMC" in the USB section. "3DPrinter@FreeMC" in the USB section.
3. Click the right mouse button and select the "Uninstall" option. The confirm dialog box will a 3. Click the right mouse button and select the "Uninstall" option. The confirm dialog box will ap- 3. Click the right mouse button and select the "Uninstall" option. The confirm dialog box will a
pear. Click "OK".
UP Plus 3D Printer User Manual 3D Printer User Manual
Winusb.dll not found" problem .dll not found" problem
.dll not found" error message, please follow the steps below: not found" error message, please follow the steps below:
4. Troubleshooting 4. Troubleshooting
and then select the
v 2013.1.31 .1.31