Table of Contents
Advertisement
the value of how many grams of material you have on the current spool. If it is a new spool, the
the value of how many grams of material you have on the current spool. If it is a new spool, the
the value of how many grams of material you have on the current spool. If it is a new spool, the
quantity should be set to 700 grams. You can also specify whether the material you are print
quantity should be set to 700 grams.
with is ABS or PLA.
TIP: An empty spool weighs about 280 grams so, if you are installing a partially used spool,
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
weigh it, and subtract 280 grams from the weight. This gives you the value to enter into the mate-
weigh it, and subtract 280 grams from the weight. This gives you the value to enter into the mat
weigh it, and subtract 280 grams from the weight. This gives you the value to enter into the mat
rial text box.
Status: Displays the temperature of
mperature of the nozzle and platform.
Stop All: Stops heating and all the movement of the printer. Once
heating and all the movement of the printer. Once you click this button, the
model being printed is cancelled
cancelled. You CANNOT resume a print job once the printer has been
stopped. After you use the "Stop All" option, you will need to re
Pause Print: This button allows you to pause a print in mid
This button allows you to pause a print in mid-progress, you can then resume the
print job where it left off. This is very useful if you, for example, want to change the material
print job where it left off. This is very useful if you, for example, want to change the material
print job where it left off. This is very useful if you, for example, want to change the material col-
our mid-print. Another popular use for pausing a job mid
print. Another popular use for pausing a job mid-print is to allow fasteners to be inserted
into printed cavities and then printed over to lock the fastener into place. Note: This keeps the e
into printed cavities and then printed over to lock the fastener into place.
truder and platform heating during the pause, it's not recommended to pause for long periods of
truder and platform heating during the pause, it's n
time.
Nozzle & Platform: The five buttons
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
and the platform. The nozzle moves to the left and right; the platform moves forward and back-
ward.
The "To" button controls the height of the platform
procedure described in 3.3.2.
The "Bottom" button returns the platform to the lowest position.
Set Nozzle Height: Takes whatever value you have in the "To" box and
Takes whatever value you have in the "To" box and transfers it to the Nozzle
box of the setup screen.
UP Plus 3D Printer User Manual
3D Printer User Manual
You can also specify whether the material you are printing
You CANNOT resume a print job once the printer has been
"Stop All" option, you will need to re-initialise the printer.
ive buttons (FL, FR, Center, NL, NR) control the position of the nozzle
the height of the platform, and is used in the nozzle height calibration
the platform to the lowest position.
click this button, the current
the printer.
u can then resume the
print is to allow fasteners to be inserted
ot recommended to pause for long periods of
position of the nozzle
used in the nozzle height calibration
transfers it to the Nozzle
v 2013.1.31
.1.31
This keeps the ex-
Advertisement
Table of Contents
