3D Printing Systems Up Plus User Manual page 27

3.2.4 Model transformation transformations
Model Transformation can be Model Transformation can be achieved through the Edit menu or the toolbar:
(Windows version)
Moving the model: Click the "Move"
distance you want to move in t
rection) in which you want to move. Each time you click the axis but- rection) in which you want to move. Each time you click the axis bu
ton the model will move again. ton the model will move again
For example: Move the model -5mm along Z axis
Procedure: 1. Click on "Move" Procedure: 1. Click on "Move"; 2. Input "-5" in the text box;
3. Click the "Z axis".
Tip: If you hold down the 'Ctrl' key, you can simply drag the Tip: If you hold down the 'Ctrl' key, you can simply drag the
model to whatever position you want. model to whatever position you want.
Rotating the model: Click the
want to rotate in the text box, then choose the axis
For example: Rotate the model around Y axis by 30 : Rotate the model around Y axis by 30
Procedure: 1. Click "Rotate"; 2. "Rotate"; 2. Input 30 in the text box
Note: positive numbers rotate counterclockwise and negative numbers rotate clo positive numbers rotate counterclockwise and negative numbers rotate clockwise
UP Plus 3D Printer User Manual 3D Printer User Manual
he "Move" button and choose, or input, the
in the text box. Then choose the axis (di-
5mm along Z axis (or down 5mm).
the "Rotate" button on the toolbar, choose or input how many degrees you
, then choose the axis to rotate around.
o
.
how many degrees you
3 . Click "Y axis".
；
ckwise.
v 2013.1.31 .1.31
(Mac version) (Mac