3D Printing Systems Up Plus User Manual page 46

6.8.b
The platform rests of three screws just like a tripod. In can be quite misleading looking at a square The platform rests of three screws just like a tripod. In can be quite misleading looking at a square The platform rests of three screws just like a tripod. In can be quite misleading looking at a square
surface while having to level a triangle (tripod) shape. It is easier if you imagine you are leveling a surface while having to level a triangle (tripod)
triangular shape.
1. Remove clips and Perfboard from the Remove clips and Perfboard from the It is harder to level the platform with the
platform.
2. Click "3D Print" / "Maintenance" Click "3D Print" / "Maintenance"
3. Enter 135 in the To: box and click "To:" Enter 135 in the To: box and click "To:"
4. Click "Center" and then move the platform and then move the platform
closer to the nozzle by increasing the "To:" closer to the nozzle by increasing the "To
value.
5. Once the nozzle is just about 0.2mm away Once the nozzle is just about 0.2mm away
from the platform, then click "NR" = Near from the platform, then click "NR" = Near
Right.
6. Look at the distance between the nozzle Look at the distance between the nozzle
and make a rough mental note, then click and make a rough mental note, then click
"FR" = Far Right
7. Look at the distance between the nozzle Look at the distance between the nozzle
and make a rough mental note, then click and make a rough mental note, then click
"FL" = Far Left
8. Look at the distance between the nozzle Look at the distance between the nozzle
and make a rough mental note, then click and make a rough mental
"NL" = Near Left
UP Plus 3D Printer User Manual 3D Printer User Manual
ne you are leveling a
It is harder to level the platform with the
Perfboard attached.
The nozzle will move to the Near ear Right hand side.
The nozzle will move to the Far Far Right hand side.
The nozzle will move to the Far left hand side. The nozzle will move to the Far
The nozzle will move to the Near Near left hand side.
v 2013.1.31 .1.31