Physical Specifications (All Models); Environmental Data; Other Standard Features - Elgar SmartWave SW5250A Operation Manual

General Description
1.8

Physical Specifications (All Models)

Height: 8.75" (222 mm)
Width: 19" (483 mm)
Depth: 23.5" (597 mm)
Weight: SW 5250A - 126.5 lbs. (57.2 kg)
SW 3500A - 100 lbs. (45.4 kg)
SW 1750A - 73 lbs. (33.1 kg)
Cooling: Air is drawn in from the top and sides and exhausted through the rear of the
chassis. 200 CFM is required for specified operation.
1.9

Environmental Data

Operating Temperature: 0°C to 45°C (32°F to 113°F).
Note temperature measured at air inlet of SW. If cabinet mounted, cabinet inlet air may
be rated at lower maximum temperature due to warming of inlet air.
Storage Temperature: -40°C to 70°C (-40°F to 158°F).
Humidity (Non-condensing): 0 to 85% at 25°C (77°F);
derate to 50% at 40°C (104°F).
1.10

Other Standard Features

•
1- to 3-Phase Programmable
•
IEEE 488.2 Interface
•
SCPI Protocol
•
Waveform Trigger Output
(1 MegΩ Load Drive; positive edge is at 0° ±30µs, 0 to 5V logic)
•
BNC Outputs for Waveform Viewing
(1 MegΩ Load Drive, 1.25 VRMS = Full Scale)
1-10
SW 5250A•SW 3500A•SW 1750A
Operation Manual