SW 5250A•SW 3500A•SW 1750A
3.3.4
WAVEFORM Menu
The WAVEFORM menu allows you to perform a variety of actions on waveshapes
and waveforms, including the creation of a new waveform based on a waveshape in
memory.
The waveshapes and waveforms are limited to spikes, dropouts, sags and surges
of existing waveforms in the scratchpad area. This is accomplished by loading the
existing waveshape into the waveform scratchpad then editing it. The edited waveform
may then be viewed, output using the SCRATCH function name in the PROGRAM
menu, or saved to the waveform library.
WAVEFORM
LOAD
EDIT
VIEW
SAVE
DELETE
Operation Manual
OUTPUT [OFF]
Operation
3-9