Elgar SmartWave SW5250A Operation Manual page 57

SW 5250A•SW 3500A•SW 1750A
3.3.4.4 SAVE Sub-Menu
The WAVEFORM menu allows you to assign a name to a new waveform and SAVE it
from the scratchpad to non-volatile memory.
1. Use the Up/Down Arrow keys or the Knob to enter the custom waveform name.
Press the Right Arrow key to proceed to the next character; press the Left
Arrow key to backspace. The last character must be "–".
2. Press the Enter key.
3. Go to SAVE or SAVE RMS and press the Enter key to save.
WAVEFORM
LOAD
EDIT
VIEW
SAVE
DELETE
SAVE Sub-Menu Status and Information Data:
Menu Item
NAME
SAVE
SAVE RMS
Operation Manual
NAME
SAVE
SAVE RMS
Status and Information Line
[– > = next char, < – = backsp]
[save waveform to library]
The waveform is saved and scaled in scratch memory
without regard to the calculated RMS value.
[save waveform to library]
The waveform is scaled so that the calculated RMS
value of the entire waveform is equal to the value of
the Vrms field in the WAVEFORM EDIT menu.
OUTPUT [OFF]
–
Operation
3-13