Table of Contents
Advertisement
Operation
10.
Select START. Enter 30 using the keypad, then press <Enter> to set the
starting phase angle to 30°.
11.
Select STOP. Enter 50 using the keypad for an ending phase angle of 50°, then
press <Enter>. Note that the instrument automatically calculates the TIME (in
this case, 0.93 ms).
12.
Select AMPL. Enter 220.6, then press <Enter> to set the amplitude to 220.6V.
13.
Press <Menu> to return to the WAVEFORM Menu.
WAVEFORM
LOAD
EDIT
VIEW
SAVE
DELETE
14.
Select VIEW to view the scratchpad, then press <Enter>. A waveshape similar
to the one illustrated below should be displayed on the scratchpad.
WAVEFORM
2
2
1
0
2
2
1
3-40
OUTPUT [OFF]
OUTPUT [OFF]
90
180
SW 5250A•SW 3500A•SW 1750A
270
Operation Manual
Hide quick links:
Advertisement
Table of Contents
