Operation
3.3.3
MEASURE Menu
If equipped with the Test and Measurement option, the MEASURE menu allows you to:
•
Measure voltage (RMS)
•
Measure current (RMS)
•
Measure frequency
•
Measure phase angle (referenced to a master)
•
Measure power (W)
•
Measure apparent power (VA)
•
Measure power factor (PF)
•
Measure peak current.
MAIN MENU
PROGRAM
MEASURE
WAVEFORM
SEQUENCE
INSTR
SYSTEM
The Measure menu contains six display fields that can be set to any of the available
measurements. To set a measurement field:
1.
Move the field select cursor to one of the six measurement fields.
2.
Press <Enter>. A pop-up window entitled SELECT MEASUREMENT will
appear; OFF will be selected.
3.
Press the Up/Down Arrow keys or use the Knob to scroll through the list of
available measurements.
4.
With the desired measurement in the selection window (or OFF to disable a
measurement), press <Enter>.
The measured value will be displayed in the display field. Active measurement fields
are continually updated and retained upon cycling power to the unit.
3-8
SW 5250A•SW 3500A•SW 1750A
OUTPUT [OFF]
AMPL A
OFF
OFF
OFF
OFF
OFF
120.00 V
0.00
0.00
0.00
0.00
0.00
Operation Manual