Table of Contents
Advertisement
SW 5250A•SW 3500A•SW 1750A
18.
While still in the PHASE A sub-menu:
a.
Select AMPL (amplitude) with the Knob or Arrow Keys.
b.
Enter 120 with the keypad to set the amplitude at 120 volts, then press
<Enter>. The inrush waveform will now be displayed on Phase A output on
the front panel.
19.
While still in the PROGRAM mode:
a.
Select PHASE B by cursoring to Phase A, then press <Enter>.
b.
Select FUNC with the Knob, then press <Enter> to place a box around the
waveshape selection.
c.
Rotate the Knob to select TRIANGLE, then press <Enter>.
d.
Select AMPL (amplitude) with the Knob, enter 120 with the keypad, then
press <Enter>. A triangular waveform will be displayed on Phase B output
on the front panel.
e.
With the field select cursor still at AMPL, press <Enter> to place a box
around the waveshape selection then, using the Knob, vary the amplitude of
the triangular waveform on Phase B.
f.
Select PHASE C by cursoring to Phase B, then press <Enter>.
g.
Select FUNC with the Knob, then press <Enter> to place a box around the
waveshape selection.
h.
Rotate the Knob to select SQUARE, then press <Enter>.
i.
Select AMPL (amplitude) with the Knob, enter 120 with the keypad, then
press <Enter>. A square waveform will now be displayed on Phase C
output on the front panel.
j.
With the field select cursor still at AMPL, press <Enter> to place a box
around the amplitude selection then, using the Knob, vary the amplitude of
the square waveform on Phase C.
20.
Press <Menu> or the Left Arrow key to return to the MAIN MENU.
Operation Manual
Operation
3-37
Hide quick links:
Advertisement
Table of Contents
