Elgar SmartWave SW5250A Operation Manual page 63

SW 5250A•SW 3500A•SW 1750A
SAVE Sub-Menu Status and Information Data:
Menu Item
NAME
SAVE
3.3.5.4 DELETE Sub-Menu
The SEQUENCE menu allows you to DELETE a sequence stored in non-volatile
memory.
ALL USER SEQUENCES - Erases all user sequence locations in non-volatile RAM.
INITIALIZE MEMORY - Resets the sequence library to the factory settings. All factory
sequences will be restored and all user sequences stored in non-volatile RAM will be
erased. You must cycle power to the unit after this function for the changes to take
effect.
NOTE: Under normal operating conditions this function is not required.
Instead, use "Delete–All User Sequences."
SEQ MENU
LOAD
EDIT
SAVE
DELETE
EXECUTE
DELETE Sub-Menu Status and Information Data:
Menu Item
SEQUENCE
ALL USER SEQUENCES
INITIALIZE MEMORY
Operation Manual
Status and Information Line
[– > = next char, < – = backsp]
[store sequence in library]
SEQUENCE
ALL USER SEQUENCES
INITIALIZE MEMORY
Status and Information Line
[delete stored sequence]
[delete all user sequences]
[reset to factory defaults]
OUTPUT [OFF]
–
Operation
3-19