Table of Contents
Advertisement
SW 5250A•SW 3500A•SW 1750A
15.
To retain the waveshape and display it on Phase A of the oscilloscope:
a.
Return to the MAIN MENU by pressing <Menu> twice.
b.
Select the PROGRAM Menu, then press <Enter>.
MAIN MENU
PROGRAM
MEASURE
WAVEFORM
SEQUENCE
INSTR
SYSTEM
16.
In the PHASE A sub-menu:
a.
Select FUNC with the Knob, then press <Enter> to place a box around the
waveshape selection.
b.
Rotate the Knob until SCRATCH is displayed, then press <Enter>. The
scratchpad waveform will now be displayed on Phase A of the oscilloscope.
17.
Press <Menu> or the Left Arrow key to return to the MAIN MENU.
3.6
SCPI Specification
Refer to the SmartWave™ Switching Amplifier SCPI Programming Manual
(Elgar Document No. M162000-03).
Operation Manual
OUTPUT [OFF]
PHASE A
AMPL
120.00
CURL
FREQ
θ
ANG
FUNC
SCRATCH
V
5.00
A
60.00
Hz
0.00
Deg
Operation
3-45
Hide quick links:
Advertisement
Table of Contents
