REMOVING THE HIGH-LIMIT THERMOSTAT AND
THERMAL CUTOFF (TCO) (GAS MODELS ONLY)
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dryer or disconnect power.
2.
Turn off gas supply to dryer.
3.
Remove the rear panel (see page 4-17
for the procedure).
4.
To remove the high-limit thermostat:
a) Remove the two wires from the ther-
mostat terminals.
b) Remove the two hex-head screws and
remove the high-limit thermostat.
5.
To remove the thermal cutoff (TCO):
a) Remove the two wires from the TCO
terminals.
b) Remove the hex-head screw, unhook
the end of the bracket, and remove
the TCO.
RD-WH
BK
Thermal
Cutoff (TCO)
RD
Viewed From Rear Of Dryer
4-12
Screw
High-Limit
Thermostat
Screws