Reverse Door Swing - Whirlpool Cabrio WED6200S User Manual

REVERSE DOOR SWING

You can change your door swing from a right-
side opening to a left-side opening, if de-
sired.
1. Place a towel or soft cloth on top of the
dryer or work space to protect the sur-
face.
Remove the door assembly
1. Open the dryer door.
2. Remove the bottom screw from each of
the 2 hinges that attach the dryer door to
the front panel of the dryer.
3. Loosen the top screw from each of the 2
hinges in Step 2.
A. Loosen these screws.
B. Remove these screws.
4. Remove the dryer door and the hinges
by lifting upward on the door. Lay the
door on a flat, protected surface, with the
inside of the door facing up. Remove re-
maining 2 loose screws from dryer front
panel.
5. Remove the 4 plastic plug strips located
outside the dryer door opening.
6. Install 4 plastic plug strips into screw
holes in the dryer left when the hinges
were removed in Step 4.
Reverse the strike
A
1. Remove the door strike from the dryer
B
door opening.
2. Remove the cosmetic screw opposite the
door strike.
A
A
B
3. Reinstall the door strike and cosmetic
screw on the opposite side of the dryer
door opening from where they were re-
moved.
NOTE: Door strike and plug strips must
be on the same side of the dryer door
opening.
2-23
A. Door strike
B. Cosmetic screw
B