Whirlpool Cabrio WED6200S User Manual page 56

b) Pull the drum out the front of the cabi-
net and remove it.
REASSEMBLY NOTE: When you reinstall
the drum and belt, make sure that the hole in
the drum is toward the rear of the unit, (see
the above photo), and that both the front and
rear drum felt seals are flared out and not
folded under the edges of the drum.
Belt Routing
Front View
Hole With Clip
Toward Rear Of Unit
4-8
8. To remove a front or rear bulkhead
roller, push the triangular clip off the
grooved slot in the roller shaft, and pull
the roller off the shaft.
Triangular Clip
Front Rollers
Front Bulkhead
Triangular Clip
Rear Bulkhead
Rear Rollers