Table of Contents
Advertisement
S
S
UPER
ERVER 6016T-T User's Manual
Power On LED
The Power On LED connector is lo-
cated on pins 15 and 16 of JF1. This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin defi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
Fan Headers
There are six fan headers on the
X8DTL-i. All are 4-pin fans but are
backward compatible with traditional
3-pin fans. FAN1 is for the CPU1
heatsink and FAN2 is for the CPU2
heatsink. See the table on the right
for pin defi nitions.
ATX PS/2 Keyboard and PS/2
Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse are located on the rear IO
panel. The mouse port is above the
keyboard port. See the table on the
right for pin defi nitions.
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. See the board layout for
the location of JL1 and the table on
the right for pin defi nitions.
Power LED
Pin Defi nitions
Pin#
15
16
NMI Button
Pin Defi nitions
Pin#
19
20
Fan Header
Pin Defi nitions
Pin#
1
2
3
4
PS/2 Keyboard and
Mouse Port Pin
Defi nitions
Pin#
Defi nition
1
Data
2
NC
3
Ground
4
VCC
5
Clock
6
NC
Chassis Intrusion
Pin Defi nitions
Pin#
1
2
5-16
Defi nition
5V Stby
Control
Defi nition
Control
Ground
Defi nition
Ground (Black)
+12V (Red)
Tachometer
PWM Control
Defi nition
Intrusion Input
Ground
Advertisement
Table of Contents
