Table of Contents
Advertisement
HDD
Channel activity for all HDDs. This light indicates DVD-ROM and/or SATA drive
activity when fl ashing.
Power
Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
3-4
Serial ATA Drive Carrier LEDs
Each Serial ATA drive has both a green and a red LED.
•
Green:
Each SATA drive carrier has a green LED. When illuminated, this
green LED (on the front of the SATA drive carrier) indicates drive activity. A
connection to the SATA backplane enables this LED to blink on and off when
that particular drive is being accessed. Please refer to Chapter 6 for instructions
on replacing failed SATA drives.
•
Red:
The red LED to indicate an SATA drive failure. If one of the SATA drives
fail, you should be notifi ed by your system management software. Please refer
to Chapter 6 for instructions on replacing failed SATA drives.
Chapter 3: System Interface
3-3
Advertisement
Table of Contents
