Table of Contents
Advertisement
SUPERSERVER 6018R-MT/6018R-MTR User's Manual
Power Fail LED
The Power Fail LED connection is lo-
cated on pins 5 and 6 of JF1. Refer to
the table on the right for pin definitions.
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and UID
LED connections. The red LED (pin
8) provides warnings of overheat, fan
failure or power failure. The blue LED
on (pin 8) works as the front panel UID
LED indicator. Refer to the tables for
more information.
NIC2 (LAN2) LED
The LED connections for LAN2 are on
pins 9 and 10 of JF1. Attach LAN LED
cables to display network activity. See
the table on the right for pin definitions.
NIC1 (LAN1) LED
The LED connections for LAN1 are on
pins 11 and 12 of JF1. Attach LAN LED
cables to display network activity. See
the table on the right for pin definitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Pin 14 is for
HDD activity and pin 13 is for the UID
switch. See the table on the right for pin
definitions
Pin Definitions
Pin#
5
6
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions
Pin#
Definition
7
Red_LED-Cathode/OH/Fan Fail/
Power Fail5.5V.SB
8
Blue_UID LED
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State
Off
On
Flashing
Pin Definitions
Pin#
9
10
Pin Definitions
Pin#
11
12
HDD LED/UID Switch
Pin Definitions
Pin#
13
14
5-14
PWR Fail LED
Definition
3.3V
Signal
Definition
Normal
Overheat
Fan Fail
NIC2 LED
Definition
Activity
Link
NIC1 LED
Definition
Activity
Link
Definition
UID Switch
HD Activity
Advertisement
Table of Contents
