5-11 Onboard Indicators; Standby Power Led - Supero SUPER SERVER 5013C-MT User Manual

S S
UPER ERVER 5013C-MT User's Manual
SATA Enable
JSP1 is used to enable or disable
Marvell's Serial ATA Controller. See
the table on right for pin definitions.

5-11 Onboard Indicators

Standby Power LED

The Standby Power LED indicator is
designated LE2. When the Standby
PWR LED is on, it indicates the
system standby power is on.
SATA Enable/Disable
Jumper Settings (JPS1)
Jumper
Position
1-2
2-3
5-20
Definition
Disabled
Enabled