About This Manual; Manual Organization - Supero SUPERSERVER 6016T-T User Manual

Table of Contents

Advertisement

About This Manual

This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6016T-T. Instal-
lation and maintenance should be performed by experienced technicians only.
The SuperServer 6016T-T is a 1U rackmount server based on the SC811TQ-520B
server chassis and the Super X8DTL-i serverboard. Please refer to our web site
for updates on supported processors.

Manual Organization

Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8DTL-i serverboard
and the SC811TQ-520B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6016T-T into a
rack and check out the server confi guration prior to powering up the system. If your
server was ordered without the processor and memory components, this chapter will
refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface

Advertisement

Table of Contents
loading

Table of Contents