Table of Contents
Advertisement
S
S
UPER
ERVER 6016T-T User's Manual
1-3
Server Chassis Features
The SuperServer 6016T-T is built on the SC811TQ-520B 1U rackmount server
chassis. The following is a general outline of the main features of the SC811TQ-
520B chassis.
System Power
For the SuperServer 6016T-T, the SC811TQ-520B chassis includes a single 520W
power supply.
Serial ATA Subsystem
The SC811TQ-520B chassis was designed to support two SATA hard drives. The
SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA drives.
Control Panel
The control panel on the SC811TQ-520B provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and system overheat conditions. The control panel also includes a main power
button and a system reset button.
Rear I/O Panel
The SC811TQ-520B's rear I/O panel accommodates one expansion card slot, one
COM port (another is internal), two USB ports, PS/2 mouse and keyboard ports, a
graphics port and two Gb Ethernet ports.
Cooling System
The SC811TQ-520B chassis has an innovative cooling design that features two
10-cm blower system cooling fans. The blower fans plug into a chassis fan header
on the serverboard. A fan speed control setting in BIOS allows fan speed to be
determined by system temperature.
1-4
Advertisement
Table of Contents
