Memory Support; Populating Dimms - Supero SUPERSERVER 6016T-T User Manual

S S
UPER ERVER 6016T-T User's Manual

Memory Support

The X8DTL-i supports up to 24 GB Registered ECC DDR3-1333/1066/800 MHz
registered ECC SDRAM in 6 DIMM slots. DIMM sizes of 4 GB, 2 GB and 1 GB
are supported.

Populating DIMMs

Follow the tables below when installing memory.
For One CPU (CPU1) Installed (Populate the CPU1 DIMM slots)
3 DIMMs P1-1A
For One CPU (CPU2) Installed (Populate the CPU2 DIMM slots)
3 DIMMs P2-1A
Branch 0
6 DIMMs P1-1A
DIMM DIMMs
Slots per Populated
Channel per Channel
3 1
3 1
Notes: Due to OS limitations, some operating systems may not show more than
4 GB of memory.
Due to memory allocation to system devices, the amount of memory that remains
available for operational use will be reduced when 4 GB of RAM is used. The
reduction in memory availability is disproportional. (See the following table.)
Populating DIMMs for Optimal Performance
Branch 0 Branch 1
P1-2A
Populating DIMMs for Optimal Performance
Branch 0 Branch 1
P2-2A
Populating DIMMs for Optimal Performance
For Two CPUs Installed
CPU1 DIMMs
Branch 1 Branch 2
P1-2A P1-3A
Memory Population Table
DIMM Type (Reg.=
Registered)
Reg. DDR3 ECC
Reg. DDR3 ECC
5-10
Branch 2
P1-3A
Branch 2
P2-3A
CPU2 DIMMs
Branch 0 Branch 1 Branch 2
P2-1A P2-2A P2-3A
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333 SR, DR
800,1066, QR