Table of Contents
Advertisement
S
S
UPER
ERVER 6015B-UR/6015B-U/6015B-NTR/6015B-NT User's Manual
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
defi nitions.
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to the hardware reset switch on the
computer case. Refer to the table on
the right for pin defi nitions.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be confi gured to function
as a suspend button (see the Power
Button Mode setting in BIOS). To turn
off the power when set to suspend
mode, depress the button for at least
4 seconds. Refer to the table on the
right for pin defi nitions.
Universal Serial Bus
(USB0/1)
Two Universal Serial Bus ports are
located on the I/O backplane. USB0
is the bottom connector and USB1 is
the top connector. See the table on
the right for pin defi nitions.
Power Fail LED
Pin Defi nitions (JF1)
Pin#
5
6
Reset Button
Pin Defi nitions (JF1)
Pin#
3
4
Power Button
Pin Defi nitions (JF1)
Pin#
1
2
Universal Serial Bus
Pin Defi nitions (USB0/1)
USB0
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
N/A
5-14
Defi nition
Vcc
Ground
Defi nition
Reset
Ground
Defi nition
PW_ON
Ground
USB1
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
Advertisement
Table of Contents
