Disconnecting Calls; Viewing Gateway Alarm Events - Cisco 3521 Administrator's Manual

Chapter 3 Configuring the Cisco IPVC 3500 Series Gateway
Table 3-18
Field
IP
Packet Loss (%)
Encryption
Audio
Video
Data

Disconnecting Calls

In the Calls tab, you can disconnect a currently active call or disconnect all active calls.
Procedure
Step 1 In the Calls tab, select a call and click Disconnect, or to disconnect all calls, click Disconnect All Calls.
.

Viewing Gateway Alarm Events

In the Event Log tab, you can view a list of reported alarm events. The Event Log displays the following
information:
•
•
•
•
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
Call Details Window Fields
Event ID—Displays the identifier for the specified alarm event.
Type—Displays the type of event.
Time—Displays the time at which the reported event occurred.
Severity—Displays the severity of the reported event.
Viewing Gateway Alarm Events
Description
Displays the IP address of the destination
endpoint of the call.
Displays the rate of packet loss in communication
from the IP side of the call to the gateway,
regardless of whether the source endpoint is
located on an ISDN or IP network.
Indicates the encryption algorithm in use for the
call (if any).
Displays the audio transcoding protocol and the
bandwidth of the voice calls in both directions
between the gateway and the destination endpoint.
Displays the video transcoding protocol, the
frame format, and the bandwidth of the video calls
in both directions between the gateway and the
destination endpoint.
The Video 2 stream is active when dual
Note
video streams for a single call are in use.
Displays the bandwidth of the data calls in both
directions between the gateway and the
destination endpoint.
3-53