Refreshing Call Information; Viewing Call Details - Cisco 3521 Administrator's Manual

Chapter 3 Configuring the Cisco IPVC 3500 Series Gateway
•
•

Refreshing Call Information

You can configure the Gateway interface to refresh information that appears in the Calls tab every ten
seconds.
Procedure
In the Calls tab, select the Auto Refresh check box.
Step 1

Viewing Call Details

In the Calls tab, you can view detailed information for each call currently defined in the gateway.
Procedure
Step 1 In the Calls tab, select a call and click Details.
The Call Details window appears.
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
Viewing Call Details, page 3-51
Disconnecting Calls, page 3-53
Table 3-18 explains the information that this window provides.
Viewing Call Information
3-51