Configuring Alert Indications - Cisco 3521 Administrator's Manual

Chapter 3 Configuring the Cisco IPVC 3500 Series Gateway
•
In the Quality of Service section of the Settings tab, you can assign a priority level to video and voice
calls.
Procedure
In the Gateway interface, on the sidebar, click Gateway (if not already selected).
Step 1
Click the Settings tab.
Step 2
Click the Quality of Service button.
Step 3
In the Quality of service support field, select one of the following option buttons:
Step 4
•
•
•

Configuring Alert Indications

In the Alert Indications section of the Settings tab, you can select which events trigger Simple Network
Management Protocol (SNMP) traps. You can also define the SNMP server to which the gateway sends
SNMP traps.
The RV object identifier (OID) reference for Cisco Systems SNMP traps is 1.3.6.1.4.1.903.
All gateway SNMP traps have the following structure:
<rvTrap> TRAP-TYPE
ENTERPRISE
VARIABLES
rvApplIndex,
rvTrapTimeStamp,
rvTrapEventType,
rvTrapSeverity,
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
000=Routine
None—Select to disable quality of service support.
Default (recommended)—Select to assign the default IP Type of Service (ToS) value for each
media type.
Custom—Select to assign your own IP ToS value for each media type. You can configure the
following additional settings:
– In the Control Priority (0-63) field, enter a whole number from 0 to 63 to set the priority level
of signaling packets that the gateway sends out. The default value is 26.
– In the Video Calls section Voice Priority (0-63) field, enter a whole number from 0 to 63 to set
the priority level of voice packets that the gateway sends out. The default value is 46 for BRI
gateways, 34 for PRI gateways.
In the Video Priority (0-63) field, enter a whole number from 0 to 63 to set the priority level of
–
video packets that the gateway sends out. The default value is 34.
In the Data Priority (0-63) field, enter a whole number from 0 to 63 to set the priority level of
–
data packets that the gateway sends out. The default value is 26.
In the Voice Calls section Voice Priority (0-63) field, enter a whole number from 0 to 63 to set
–
the priority level of voice packets that the gateway sends out. The default value is 46.
You can click Restore Defaults to restore all default settings.
Note
Cisco
{
Configuring Gateway Settings
3-15