Cisco 3521 Administrator's Manual page 59

Chapter 2 Installing the Cisco IPVC 3500 Series Gateway
Table 2-4
Element
Information section
Temperature threshold
Status section
Power
Alarm
Fans
Temperature
Related Topics
Setting Cisco IPVC 3544 Chassis Temperature Thresholds, page 2-22
•
• Refreshing the System Section, page 2-22
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
System Page Elements
Description
This section provides the following information
about the Cisco IPVC 3544 chassis hardware:
Serial number—Displays the serial number
•
of the chassis.
Part number—Displays the part number of
•
the chassis.
System configuration—Identifies the
•
hardware configuration the chassis uses.
In this section, you can set the following
temperature values that the chassis uses to trigger
changes in the ambient temperature status:
• Low—Enter the temperature value at which
the gateway module turns off the chassis
temperature alarm. The value is measured in
Celsius.
High—Enter the temperature value above
•
which the gateway module turns on the
chassis temperature alarm. The value is
measured in Celsius.
These LEDs provide information about chassis
operation.
This LED lights green for normal operation. It
lights red when one power supply fails.
This LED lights green for normal operation. It
lights red when a system failure occurs.
This LED lights green for normal operation. It
lights red when one or more fans fail. A message
then appears indicating which fan has failed.
This LED lights green for normal operation. It is
red when the chassis determines that the ambient
temperature rises above the high temperature
threshold. The LED blinks when the falling
ambient temperature crosses the high threshold to
within five degrees of the high threshold.
Configuring Cisco IPVC 3544 Chassis Parameters
2-21