5: Wet:dry Balance - Yamaha SY85 Owner's Manual

[PERFORMANCE] → [EFFECT EDIT] → [MENU] → 5:Wet:Dry Balance → [ENTER/YES]
delicate thing. Even slight changes can make a big difference to the final sound. The
parameters provided in this screen provide precise balance control.
Out1 Wet/Out2 Wet
Out1 Dry/Out2 Dry
42
PERFORMANCE EDIT MODE /

5: WET:DRY BALANCE

The balance between the direct sound of the voice and the effect sound is a
EF`Wet:Dry`Balance`````
`````Out1=``50`:`50``````Out2=``50`:`50
F1 F2
CS1 CS2
Range: 0 ... 100
Controls: [CS3]/[CS7], [-1] [+1], Dial
These parameters and the corresponding "Out1 Dry" and "Out2 Dry" pa-
rameters, below, work together to balance the effect ("wet") and direct ("dry")
signals delivered via the EFFECT 1 and EFFECT2 processors. Higher "Wet"
values produce more effect sound in relation to the direct, dry sound of the
voice.
Although the "Wet" and "Dry" parameters can be set independently, adjust-
ing one will cause the other to change so that their total is always 100(%).
If a controller is assigned to the "Out1 Wet" or "Out2 Wet" parameter
(page 45), an inverse "c" will appear to the right of the parameter.
Range: 0 ... 100
Controls: [CS4]/[CS8], [-1] [+1], Dial
These parameters and the corresponding "Out1 Wet" and "Out2 Wet" pa-
rameters, above, work together to balance the effect ("wet") and direct ("dry")
signals delivered via the EFFECT 1 and EFFECT 2 processors, respectively.
Higher "Dry" values produce more direct, dry sound in relation to the effect
sound.
Although the "Wet" and "Dry" parameters can be set independently, adjust-
ing one will cause the other to change so that their total is always 100(%).
If a controller is assigned to the "Out1 Dry" or "Out2 Dry" parameter (page
45), an inverse "c" will appear to the right of the parameter.
EFFECT EDIT
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8