Pitch Eg Data Copy - Yamaha SY85 Owner's Manual

[VOICE] → [EDIT] → [MENU] → 4:Pitch EG → [ENTER/YES] → [ENTER/YES] → [COPY]
This function facilitates voice editing by allowing the pitch EG parameters from
any other voice (the "source" voice) to be copied to the current voice. You can copy
a pitch EG setup that is close to the type you want, then edit it to produce the re-
quired sound.
PEG`COPY````````From`Voice``````````````
`````````````````````¡A1:InitVce
From Voice

PITCH EG DATA COPY

F1 F2 F3
CS1 CS2 CS3
Range: Any INTERNAL or CARD voice
Controls: MEMORY, GROUP, PROGRAM, [CS5], [-1] [+1], Dial
Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to
select the memory area from which the source voice is to be selected. Use the
GROUP keys to select the source voice bank, then use the PROGRAM keys to
select the source voice number. The [CS5] slider and other data entry controls
can also be used to select the source voice number.
Once the source voice has been selected, press the [ENTER/YES] key. "Are
you sure?" will appear on the display.
PEG`COPY````````From`Voice``````````````
Are`you`sure`?```````¡A1:InitVce
Press the [ENTER/YES] key again to copy the pitch EG data, or press
[EXIT/NO] to cancel the copy operation. Once the copy operation has finished,
"Completed!" will appear on the display briefly, then the display will return to
the pitch EG edit mode.
F4 F5 F6
CS4 CS5 CS6
VOICE EDIT MODE /
F7 F8
CS7 CS8
4:Pitch EG 77