2: Send Select & Level - Yamaha SY85 Owner's Manual

[PERFORMANCE] → [EFFECT EDIT] → [MENU] → 2:Send → [ENTER/YES]
output from the voice assigned to each layer is sent, and at what level. It is also
possible to control the effect send level via keyboard dynamics and key scaling.
Layer
Switch 1a, 1b/2a, 2b
38
PERFORMANCE EDIT MODE /
2: SEND SELECT & LEVEL
The parameters provided here determine to which of the SY85 effect stages the
EF`Send`<InitVce`>`Switch`Levl`VelS`Kscl
``Layer=A(¡A1)```1a/-`2a/b`127```+0```+0
F1 F2
CS1 CS2
Range: A, B, C, D
Controls: [CS2], PROGRAM [1] ... [4], [-1] [+1], Dial
Selects the layer to be edited. The name of the voice assigned to the se-
lected layer is shown between parentheses on the upper line of the display.
Range: See text below.
Controls: [CS4]/[CS5], [-1] [+1], Dial
Determines to which of the EFFECT 1 and EFFECT 2 effect stages the
output from the current layer is sent. The [-1] and [+1] keys can then be used
to turn the stage on ("a" or "b") or off ("."). The [CS4] and [CS5] sliders
select the following settings in sequence:
CS4 (EFFECT 1)
1./. (a and b off)
1a/. (a on, b off)
1a/b (a and b on)
1./b (a off, b on)
If a "single" type effect is selected then only stage "a" can be selected. If a
"dual" or "cascade" type effect is selected, then both stages "a" and "b" can be
selected. An effect stage that cannot be selected is represented by "-" on the
display.
EFFECT EDIT
F3 F4 F5
CS3 CS4 CS5
CS5 (EFFECT 2)
2./. (a and b off)
2a/. (a on, b off)
2a/b (a and b on)
2./b (a off, b on)
F6 F7 F8
CS6 CS7 CS8