4: Drum Voice Name - Yamaha SY85 Owner's Manual

[VOICE] → [EDIT] → [MENU] → 4:Name → [ENTER/YES]
be used to assign a name of up to 8 characters to the current drum voice.
Name
124
DRUM VOICE EDIT MODE /

4: DRUM VOICE NAME

Your original drum voices should naturally have original names. This function can
DRUM`VOICE`Name```````````````"DR`PTN``"
[CLR][UPR][LWR][SPC]````````````[†]``[¥]
F1 F2
CS1 CS2
Range: See character list, below
Controls: GROUP, PROGRAM, [F1] ... [F4], [F7], [F8]
[CS1] ... [CS8], [-1] [+1], Dial
Assigns a name of up to 8 characters to the current drum voice.
Use the [F7] function key to move the character cursor to the left, and the
[F8] function key to move the cursor to the right. Use the GROUP and PRO-
GRAM keys to input a character at the cursor position. Each GROUP or PRO-
GRAM key selects the three characters printed above it in sequence. It is also
possible to use the [-1] and [+1] keys or dial to scroll through the available
characters (see list below).
The sliders, [CS1] through [CS8], independently select characters for the
corresponding character position: [CS1] selects the first character, [CS2] selects
the second character, and so on.
The first four function keys also perform important functions: [F1] clears
the entire name, [F2] selects upper-case characters for GROUP and PROGRAM
key entry, [F3] selects lower-case characters for GROUP and PROGRAM key
entry, and [F4] inserts a space at the cursor position.
GROUP key
[A]: A → B → C
[B]: D → E → F
[C]: G → H → I
[D]: J → K → L
[E]: M → N → O
[F]: P → Q → R
[G]: S → T → U
[H]: V → W → X
DRUM KEY EDIT
F3 F4 F5
CS3 CS4 CS5
PROGRAM key
[1]: Y → Z → 0
[2]: 1 → 2 → 3
[3]: 4 → 5 → 6
[4]: 7 → 8 → 9
[5]: * → & → _
[6]: / → . → ,
[7]: ' → ! → ?
[8]: # → : → ;
F6 F7 F8
CS6 CS7 CS8