Adjusting The Volume Balance Between The Parts - Yamaha PSR-S970 Owner's Manual

To change the Voice for each channel
Press one of the [1 ] – [8 ] buttons corresponding to the desired channel to call up the Voice Selection display
(page 36), then select the desired Voice.
NOTE
The Audio channel does not have a Voice and, hence, cannot be changed.
3
Press the [EXIT] button to close the CHANNEL ON/OFF display.

Adjusting the Volume Balance Between the Parts

You can adjust the volume balance between the parts (Song, Style, LEFT, RIGHT 1/2, etc.).
1
Press the [BAL.] button once or twice to call up the desired
page of the BALANCE display which contains the desired
channel.
There are two pages, 1/2 and 2/2.
2
Use the [1 ] – [8 ] buttons to adjust the volume of the
desired parts.
In the BALANCE 1/2 page, you can adjust the volume balance between the
Song (page 62), Style, Multi Pad (page 76), microphone (or guitar) and
keyboard parts (LEFT, RIGHT1 and 2).
In the BALANCE 2/2 page, you can adjust the volume balance between the
Song (MIDI), Audio (page 71), sound input from the [AUX IN] jack, and all
keyboard parts (KBD). For information on the [2 ] – [3 ] buttons, refer
to page 74.
3
Press the [EXIT] button to close the BALANCE display.
NOTE
You can also turn Style channels on/
off for dynamic effect by using the LIVE
CONTROL knobs. For instructions on
how to assign the functions to the
knobs, refer to page 40.
2
NOTE
• You can also control the volume bal-
ance between the parts by using the
LIVE CONTROL knobs. For instruc-
tions on how to assign the functions
to the knobs, refer to page 40.
• On the VOL/VOICE page of the MIX-
ING CONSOLE display (page 95),
you can adjust the volume for the
Song and Style parts independently.
NOTE
When the UD-WL01 USB Wireless
LAN adaptor is connected to the
instrument, "WLAN" appears in the
BALANCE 2/2 page, and the volume of
the audio input via an iPhone/iPad
application tool (page 102) can also be
adjusted.
PSR-S970/S770 Owner's Manual
2
57