Aeg Data Copy - Yamaha SY85 Owner's Manual

[VOICE] → [EDIT] → [MENU] → 2:Amplitude EG → [ENTER/YES] → [ENTER/YES] → [COPY]
any other voice (the "source" voice) to be copied to the current voice. You can copy
an envelope that is close to the type you want, then edit it to produce the required
sound.
From Voice
64
VOICE EDIT MODE /

AEG DATA COPY

This function facilitates voice editing by allowing the amplitude EG data from
AEG`COPY````````From`Voice``````````````
`````````````````````¡A1:InitVce
F1 F2
CS1 CS2
Range: Any INTERNAL or CARD voice
Controls: MEMORY, GROUP, PROGRAM, [CS5], [-1] [+1], Dial
Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to
select the memory area from which the source voice is to be selected. Use the
GROUP keys to select the source voice bank, then use the PROGRAM keys to
select the source voice number. The [CS5] slider and other data entry controls
can also be used to select the source voice bank and number.
Once the source voice has been selected, press the [ENTER/YES] key. "Are
you sure?" will appear on the display.
AEG`COPY````````From`Voice``````````````
Are`you`sure`?```````¡A1:InitVce
Press the [ENTER/YES] key again to copy the AEG data, or press [EXIT/
NO] to cancel the copy operation. Once the copy operation has finished, "Com-
pleted!" will appear on the display briefly, then the display will return to the
amplitude EG edit mode.
2:Amplitude EG
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8