4: Tune - Yamaha SY85 Owner's Manual

Hide thumbs Also See for SY85:
Table of Contents

Advertisement

[PERFORMANCE] → [EDIT] → [MENU] → 1:Layer → [ENTER/YES] → [ENTER/YES] →
→ [MENU] → 4:Tune → [ENTER/YES]
More than just simple tuning, the note shift and fine tune parameters make it
possible to create harmony and voice-thickening detune effects between layers.
LAYER`Tune`)NtShft(```````<InitVce`>ABCD
``+0```+0```+0```+0```+0```+0```+0```+0`
NtShft (Note shift)
Fine (Fine tuning)

4: TUNE

F1
F2
F3
CS1
CS2
CS3
The name of the currently selected voice/layer is shown in the upper right
corner of the display. The characters "ABCD" to the right of the voice name
indicate the status of each voice: a capital letter if the voice is on, a lower-case
letter if the voice is muted, and a dash if the voice is off.
Range: -63 ... +63
Controls: [CS1], [CS3], [CS5], [CS7], [-1] [+1], Dial
Individually shifts the pitch of each active element up or down in semitone
steps.
Use the [CS1], [CS3], [CS5], and [CS7] sliders to shift the pitch of the A,
B, C, and D layer voices, respectively. A setting of "-12," for example, shifts
the pitch of the selected layer down by one octave; a setting of "+4" shifts the
pitch up by a major third.
The Note Shift parameter can be used to transpose a voice to its most
useful range, or to create harmony (intervals) between different layers in a
performance combination.
Voices that are turned off are indicated by "---" on the display.
Range: -7 ... +7
Controls: [CS2], [CS4], [CS6], [CS8], [-1] [+1], Dial
Allows slight upward or downward pitch adjustment of each active element.
Use the [CS2], [CS4], [CS6], and [CS8] sliders to fine tune the A, B, C,
and D layer voices, respectively.
The maximum minus setting of "-7" produces a downward pitch shift of
approximately 2 cents (a "cent" is 1/100th of a semitone), and the maximum
plus setting of "+7" produces an upward pitch shift of approximately 2 cents. A
setting of "0" produces no pitch change.
The Fine parameter allows different layers in a performance combination to
be slightly detuned in relation to each other, thereby "thickening" the overall
sound.
Voices that are turned off are indicated by "--" on the display.
F4
F5
F6
CS4
CS5
CS6
PERFORMANCE EDIT MODE /
F7
F8
CS7
CS8
1:Layer
17

Advertisement

Table of Contents
loading

Table of Contents