Balance - Yamaha Montage 7 Reference Manual

Reference
Performance
Velocity Limit
Determines the minimum and maximum values of the velocity range within which each Element will
respond. Each Element will only sound for notes played within its specified velocity range. If you first
specify the maximum value and then the minimum value, for example "93 to 34," then the Velocity range
covers both "1 to 34" and "93 to 127."
Settings:
1 – 127
Note Limit
Determines the lowest and highest notes of the keyboard range for each Element. Each Element will only
sound for notes played within its specified range. If you first specify the highest note and then the lowest
note, for example "C5 to C4," then the note range covers both "C-2 to C4" and "C5 to G8."
Settings:
C -2 – G8

Balance

From the Balance display you can set parameters related to Level, Pitch, and Pan for the eight Elements.
[PERFORMANCE]  [EDIT]  Part selection  [All]  [Balance]
Operation
SW (Element Switch)
Determines whether each Element is active or not.
Settings: Off, On
Coarse (Coarse Tune)
Determines the pitch of each Element in semitones.
Settings:
-48 – +48
Fine (Fine Tune)
Determines the fine tuning for the pitch of each Element.
Settings:
-64 – 63
Cutoff (Cutoff Frequency)
Determines the Cutoff Frequency for each Element.
Settings: 0 – 255
Pan (Element Pan)
Determines the stereo pan position for each Element.
Settings:
L63 (far left) – C (center) – R63 (far right)
Level
Determines the level of each Element.
Settings: 0 – 127
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
118