2: Sample Dump Transmit - Yamaha SY85 Owner's Manual

2: SAMPLE DUMP TRANSMIT

[SHIFT]+[UTILITY] → [MIDI] → [MENU] → 2:Transmit → [ENTER/YES]
This function initiates transmission of MIDI Sample Dump data to an external
MIDI device.
MIDI`SAMPLE`DUMP`Transmit```````````````
`````Sample=--``````````````````````````
Sample
F1 F2 F3
CS1 CS2 CS3
Range: 00 ... 63
Controls: [CS3], [-1] [+1], Dial
Use [CS3] to select the number of the sample to be transmitted ("--" ap-
pears on the display if no samples are available).
When ready to transmit the data, press the [ENTER/YES] key. The follow-
ing confirmation display will appear:
MIDI`SAMPLE`DUMP`Transmit`Are`you`sure`?
`````Sample=--``````````````````````````
Press [ENTER/YES] again to confirm that you want to go ahead with the
transmission, or press [EXIT/NO] to cancel.
"MIDI Transmitting!" appears while the data is being transmitted, as does a
countdown of the sample packets being sent.
The [EXIT/NO] key can be used to cancel reception at any time.
F4 F5 F6
CS4 CS5 CS6
MIDI SAMPLE DUMP
WAVE EDIT MODE /
F7 F8
CS7 CS8
249