delicate thing. Even slight changes can make a big difference to the final sound. The
parameters provided in this screen provide precise balance control.
Out1 Wet/Out2 Wet
Out1 Dry/Out2 Dry
42
PERFORMANCE EDIT MODE /
5: WET:DRY BALANCE
The balance between the direct sound of the voice and the effect sound is a
Range: 0 ... 100
Controls: [CS3]/[CS7], [-1] [+1], Dial
These parameters and the corresponding "Out1 Dry" and "Out2 Dry" param-
eters, below, work together to balance the effect ("wet") and direct ("dry")
signals delivered via the EFFECT 1 and EFFECT 2 processors. Higher "Wet"
values produce more effect sound in relation to the direct, dry sound of the
voice.
Although the "Wet" and "Dry" parameters can be set independently, adjust-
ing one will cause the other to change so that their total is always 100(%).
If a controller is assigned to the "Out1 Wet" or "Out2 Wet" parameter
(page 45), an inverse "c" will appear to the right of the parameter.
Range: 0 ... 100
Controls: [CS4]/[CS8], [-1] [+1], Dial
These parameters and the corresponding "Out1 Wet" and "Out2 Wet" pa-
rameters, above, work together to balance the effect ("wet") and direct ("dry")
signals delivered via the EFFECT 1 and EFFECT 2 processors, respectively.
Higher "Dry" values produce more direct, dry sound in relation to the effect
sound.
Although the "Wet" and "Dry" parameters can be set independently, adjust-
ing one will cause the other to change so that their total is always 100(%).
If a controller is assigned to the "Out1 Dry" or "Out2 Dry" parameter (page
45), an inverse "c" will appear to the right of the parameter.
EFFECT EDIT