4: Drum Voice Initialize - Yamaha SY85 Owner's Manual

[VOICE] → [JOB] → [MENU] → 2:Initialize → [ENTER/YES]
editing an existing voice, use this function to initialize all drum voice parameters.
144
DRUM VOICE EDIT MODE /

4: DRUM VOICE INITIALIZE

When you want to program a totally new drum voice "from scratch," rather than
DRUM`JOB`Initialize```````Type
````````````````````````````1
F1 F2
CS1 CS2
Use [CS6] to select the type of drum voice to be initialized. Press [ENTER/
YES] to begin the initialize procedure. The following confirmation display will
appear:
DRUM`JOB`Initialize```````Type
Are`you`sure`?``````````````1
Press [ENTER/YES] again to confirm that you want to go ahead with the
initialize operation (which will erase all current edited data), or press [EXIT/
NO] to cancel.
When the drum voice data has been initialized, "Completed!" will appear
briefly on the display, then the display will return to the mode that was en-
gaged prior to calling the drum voice initialize function.
JOB
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8