Table of Contents
Advertisement
Third stream: Delivers low-definition video.
The properties for each stream type are configured on the Setup > Camera Setup >
Video page (see
Camera Name
You can change the camera name according to your needs. For more information, see
Configuring System General Settings
Live View Toolbar
The Live View toolbar allows you to take snapshot. The following table lists the controls
in more detail.
Figure 14 Live View Toolbar
Table 1 Live View Toolbar Icons
Icon
VA Event List
To view the list of VA events, click the
blinking when VA alarm comes in.
Note:
Max 100 VA alarms will be listed after clicking
cycling. Please go to Information
records. Refer to
Honeywell 35 Series IP Cameras User Guide
Configuring Video Settings
Description
By default this option is enabled. You can talk and audience can listen through in built camera
speakers, Click to disable this option.
Click to turn on the audio to listen to the monitoring site. Click it again to turn off the audio.
Click to switch to the full screen mode.
Click to Pin the live view to the toolbar. Click once again to unpin.
Click to capture and save video images. The captured images will be displayed in a pop-up
window. Right click the image and select Save picture as to save it in JPEG (*.jpg).
Logs
>
Alarm
Log.
on page 17).
on page 52.
icon on the Main Page. The icon
to display event information by
Alarm log to see or search more alarm log
>
will be
15
Hide quick links:
Advertisement
Table of Contents
