How To Control On-Screen Menu Utility; Auto Scan - Honeywell ScanDome II HSDN-251NS/PS Operation & Programming Manual

3.3 How to control On-Screen Menu Utility

Action
MENU
Joystick left or right
Joystick up or down
Joystick down
Zoom handle twist
CTRL + Joystick

3.4 Auto Scan

(First Item of the Main menu / Shortcut: Scan)
The Auto scan supports up to 8 programmed angles at user-programmable speeds. Follow
these steps to program Auto Scan:
1. Press the Scan key to enter Auto Scan menu directly. Or press the Menu key to display the
main menu on the monitor. Scroll to Auto Scan and push the Joystick to the right.
2. Select an Auto Scan number by pushing the Joystick left or right.
ESC
AUTO SCAN SETUP
SCAN 01
SPEED(MODE) : FAST VECTOR
START ANGLE : 127.1, 027.7 X7
END ANGLE
SCAN DIR.
SWAP
SAVE AND EXIT (ESC TO CANCEL)
HOLD DOWN CTRL KEY
WHILE SELECT POSITION.
Call on On-screen menu utility
Go into the sub-menu items.
Execute the command(exit)
Change value.
Navigate through the menu items.
Navigate through the menu items.
Finish editing title.
Change value.
Enter editing title mode.
Change value of angle
Escape (EXIT)
: AUTOSCAN01
: 157.7, 080.7 X3
: CCW
: OFF
11
Function