Nonsecure Voice Communication Tone And Message (R4.4) - Siemens HiPath 8000 Operating Manual

Individual phone configuration
Step by Step
User
Configuration
Connected calls
Secure call alert
Yes
Save & exit
158
Nonsecure voice communication tone and
message (R4.4)
Use this option to activate an alerting tone that you hear
when a nonsecure voice connection is set up to the par-
ty you are currently talking to. The message "Call not en-
crypted" also appears.
Prerequisite: Secure connection setup is the prefer-
ence set by your service personnel.
z You can also configure this setting via the Web interface
page 184.
v
Press the key shown until the "Settings" tab is active.
Confirm.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.