Do Not Disturb; Enabling Do Not Disturb Via A Key; Enabling Do Not Disturb Via The Idle Menu - Siemens HiPath 8000 Operating Manual

Step by Step
Do not disturb off
Do not disturb on

Do not disturb

If "Do not disturb" is activated, your telephone will not
ring. The caller hears the busy signal.
On multi-line telephones (
only activate the "Do not disturb" function for
your primary line.
Prerequisite: A programmable sensor key must be as-
signed the function "DND" (Do Not Disturb)
( page 66).

Enabling do not disturb via a key

S
Press the "Do not disturb" programmable sensor key.
T
The programmable sensor key blinks to signal incoming
calls. The caller hears the busy signal. Calls for pickup
groups are however connected.
R
To deactivate the "Do not disturb" function, press the lit
programmable sensor key again.
You can also use the programmable key to acti-
vate the "Do not disturb" function during a call or
deactivate it when an incoming call is being sig-
naled.
or

Enabling do not disturb via the idle menu

Select and confirm the option shown in the idle menu.
The "Do not disturb" icon appears in the header.
or
Select and confirm the option shown in the idle menu.
The "Do not disturb" icon is deleted.
Privacy/security
page 13) you can
117