Duration For Idle Mode - Siemens HiPath 8000 Operating Manual

Individual phone configuration
Step by Step
User
Phone
Display
Inactivity delay (mins)
30
Save & Exit
142

Duration for idle mode

Set the duration for which the OpenStage should be
idle before automatically switching to idle mode.
z You can also configure this setting via the Web interface
page 184.
v
Press the key shown until the "Settings" tab is active.
Confirm.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select
Confirm
h
If necessary, delete the current entry.
j
Enter the required value in minutes
i
Confirm.
Select and confirm the option shown.
1 The phone displays the current setting.
[1]
.
page 27.