Siemens HiPath 8000 Operating Manual page 72

Enhanced phone functions
Step by Step
User
Configuration
Incoming calls
Deflect
Allow deflection
Yes
Default destination
Deflect to DSS
Yes
Save & Exit
72
Permitting call deflection
z You can also configure this setting via the Web interface
page 184.
v
Press the key shown until the "Settings" tab is active.
Confirm.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
j
Enter and confirm the phone number to which the sta-
tion should be deflected.
or Deflecting to a DSS number
A call can be deflected to a direct station selection
(DSS) subscriber using the DSS key, if the key is config-
ured and the deflect function is activated by your ser-
vice personnel
Select and confirm the option shown.
Select and confirm the option shown in the context
menu to permit call deflection.
Select and confirm the option shown.
Entering a destination phone number is not man-
datory when call deflection is active. If you want
to deflect a call, you are prompted to enter a des-
tination phone number if there is none stored.
page 101.