Fixing Problems; Caring For Your Telephone; Troubleshooting; Contact Partner In The Case Of Problems - Siemens HiPath 8000 Operating Manual

Hide thumbs Also See for HiPath 8000:
Table of Contents

Advertisement

Fixing problems

Caring for your telephone

Never allow the telephone to come into contact with coloring, oily or
aggressive agents.
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use cleaning fluids containing alcohol or plastic-damaging deter-
gents to clean the telephone. The use of scouring agents is also forbid-
den.

Troubleshooting

Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated on your telephone
("Do not disturb" appears on the screen
You cannot dial an external number:
Check whether your telephone is locked ("Phone locked: Enter Password"
appears on the screen). If the phone is locked, unlock it.
To correct any other problems:
First contact the relevant service personnel. Problems that cannot be cor-
rected should be referred to Customer Service.

Contact partner in the case of problems

Contact your service personnel if a fault persists for more than five min-
utes, for example.
Fixing problems
page 26). If so, deactivate it.
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openstage 60Openstage key moduleOpenstage 80

Table of Contents